Go to homepage
€0.00*
Need help?
Need help?
Do you have questions or require assistance?

9694 - AC Clamp On Sensor, 5A, 40 Hz to 5 kHz

AC current probe, CAT III 300 V, measurement range up to 5 A AC, basic accuracy ±0.3% rdg., phase accuracy ±2°, frequency range 40 Hz to 5 kHz, max. conductor diameter 15 mm, operating temperature 0 °C to 50 °C
9694 - AC Clamp On Sensor, 5A, 40 Hz to 5 kHz
9694 - AC Clamp On Sensor, 5A, 40 Hz to 5 kHz
9694 - AC Clamp On Sensor, 5A, 40 Hz to 5 kHz
9694 - AC Clamp On Sensor, 5A, 40 Hz to 5 kHz

€278.00*

Content: 1 Each

*Prices excl. VAT plus shipping costs

In stock in Germany

Available stock: 3
Product number: 9694
EAN: 4536036007448
Length: 135 mm
Width: 24 mm
Height: 46 mm
Weight: 0.23 kg

Product information 9694 - AC Clamp On Sensor, 5A, 40 Hz to 5 kHz

Key Specifications

  • AC currents up to 5 A, continuous 50 A (45 to 66 Hz)
  • Frequency Bandwidth 40 Hz to 5 kHz
  • Basic accuracy: ±0,3% rdg.,
  • Operating temperature: 0°C to 50°C
  • Output voltage ratio 10 mV / A

Typical Applications

  • AC current measurement on conductors rated for 5 A nominal current (continuous measurement up to 50 A)
  • Current monitoring and logging in industrial AC power systems and branch circuits
  • Measurement of output current and basic harmonic analysis in inverter-driven loads
  • Installation in confined spaces, such as inside control cabinets or distribution boards

Detailed Product Overview

The Hioki 9694 is a compact clamp-on current probe designed for AC current measurements up to 5 A in low-voltage circuits. Rated CAT III for AC voltages up to 300 V rms, it is suitable for use in power distribution systems, inverter-driven equipment, and installations with limited space, such as control cabinets. The current probe accommodates conductors up to 15 mm in diameter and operates reliably within an ambient temperature range of 0 °C to 50 °C. It supports continuous current measurements up to 50 A AC in the frequency range from 45 Hz to 66 Hz.

Basic amplitude accuracy is ±0.3% of reading, while phase accuracy is ±2° between 45 Hz and 5 kHz. In the extended frequency range from 40 Hz to 5 kHz, amplitude deviation is ±1%. The output signal of 10 mV/A is delivered via a fixed 3-meter cable with BNC connector, suitable for voltage-input instruments such as the Hioki PW3360 and PW3365.
  • 9694 Clamp On Sensor 
  • Instruction Manual

Related products

PW3360-20 - Compact Three-Phase Power Logger PW3360-20 - Compact Three-Phase Power Logger
PW3360-20
PW3360-20 - Compact Three-Phase Power Logger
Portable 3-phase 4-wire Clamp-on Power Logger, voltage range 600 V, current measurement with external sensors, ranges from 50 mA up to 5 kA, frequency measurement 40 to 70 Hz, with SD card slot, LAN and USB

€1,248.00*
View product
20 %
PW3360-21 - Compact Three-Phase Power Logger with Harmonic Analysis HIOKI PW3360-21 clamp on power-logger harmonics up to 40th order hands holding
PW3360-21
PW3360-21 - Compact Three-Phase Power Logger with Harmonic Analysis
Portable 3-phase 4-wire Clamp-on Power Logger, voltage range 600 V, current measurement with external sensors, ranges from 50 mA up to 5 kA, frequency measurement 40 to 70 Hz, harmonic measurement up to the 40th order, SD card slot, LAN and USB

€1,502.40* €1,878.00*
View product
PW3365 - Compact Three-Phase Power Logger with non-contact voltage sensors PW3365 - Compact Three-Phase Power Logger with non-contact voltage sensors
PW3365-20
PW3365 - Compact Three-Phase Power Logger with non-contact voltage sensors
Non-contact 3-phase 4-wire Clamp-on Power Logger, 90 V to 520 V at 50/60 Hz, 50 mA to 5 kA using external current sensors, harmonic measurement up to the 13th order, SD memory card slot (max. 8 GB), LAN and USB interface

€3,058.00*
View product